Always Dry Lucknow

Headlight Restoration / Repair Service Near me | Lucknow

Headlight Repair Service in your city

The plastic materials that your headlights or tail lamps are made out of are degrading & become fade with time. This happens because UV radiation and continuous exposure to elements chip away at the outer layer. This becomes a safety issue as well because of poorer visibility at night.

At Always Dry Lucknow, our team first judges the severity of the cloudiness of the lights and lens, post which we do sanding and polishing to the affected areas to restore the clarity of the headlights. 

We finish the entire process by applying a coat of UV protectant to ensure safety from any wear and tear.

how our expert team works for Headlight Repair ?

1. Assessment and Preparation

Headlight repair is essential for maintaining the safety and appearance of your vehicle. Over time, headlights can become cloudy, yellowed, or damaged due to exposure to the elements and regular wear and tear. Here’s a detailed guide to the headlight repair process using various techniques.

Initial Inspection:

  1. Check the Condition: Look at the headlights to see the extent of the damage, such as oxidation, yellowing, cracks, or scratches.
  2. Identify the Type: Determine the type of headlight lens material (usually polycarbonate plastic) and the specific damage.

Preparation:

  1. Cleaning: Clean the headlight surface with soap and water to remove dirt and debris.
  2. Masking: Use masking tape to protect the areas around the headlight to prevent accidental damage during the repair process.

2. Restoration Techniques

A. Removing Oxidation and Yellowing:

  1. Sanding:
    • Wet Sanding: Use wet sanding with different grit sandpapers (starting from 800 to 3000 grit) to remove the oxidized layer.
      • Start with a coarse grit (e.g., 800) to remove the oxidation.
      • Progress to finer grits (e.g., 1500, 2000, and 3000) to smooth the surface.
    • Technique: Keep the surface wet to prevent overheating and ensure smooth sanding. Sand in a consistent, circular motion.
  2. Polishing:
    • Polishing Compound: Apply a plastic polishing compound to the headlight lens using a microfiber cloth or a polishing machine.
    • Buffing: Buff the surface to restore clarity and shine. Use a foam or wool pad with a polishing machine for the best results.
    • Re-check: Ensure the headlight surface is clear and free from any sanding marks.
  3. UV Protection:
    • Sealant Application: Apply a UV sealant or a clear coat to protect the headlight from future UV damage.
    • Curing: Allow the sealant to dry and cure according to the manufacturer’s instructions.

B. Fixing Cracks and Scratches:

  1. Small Scratches:
    • Sanding and Polishing: Follow the sanding and polishing steps mentioned above to remove minor scratches.
  2. Cracks:
    • Plastic Welding: Use a plastic welder to fix small cracks. This involves melting the plastic around the crack and fusing it back together.
    • Filler Application: For larger cracks, use a plastic filler or epoxy to fill the crack. Sand and polish the surface after the filler has cured.

C. Removing Moisture:

  1. Dismantling:
    • Opening the Headlight: If the headlight has moisture inside, it may need to be dismantled. Use a heat gun or an oven to soften the adhesive around the headlight assembly.
    • Drying: Remove the headlight cover and use a hairdryer or silica gel packets to remove moisture.
  2. Reassembly:
    • Sealing: Re-seal the headlight with new adhesive or silicone sealant to prevent future moisture.
    • Testing: Test the headlight to ensure it is properly sealed and working.

3. Advanced Techniques

A. Headlight Replacement:

  1. Full Replacement: In cases where the damage is too extensive, replacing the headlight assembly might be the best option.
  2. Professional Help: This usually requires professional tools and expertise, especially for modern vehicles with complex headlight systems.

B. Protective Film Application:

  1. PPF (Paint Protection Film): Apply a clear protective film to the headlight to guard against future damage.
  2. Installation: Carefully apply the film, ensuring there are no air bubbles or flaws.

Final Steps

  1. Final Inspection:
    • Check Clarity: Ensure the headlight is clear and free from defects.
    • Test Functionality: Check that the headlight works correctly (both low and high beams).
  2. Maintenance Advice:
    • Regular Cleaning: Advise the vehicle owner to clean the headlights regularly to maintain clarity.
    • UV Protection: Suggest periodic use of a UV protectant.

Conclusion

Proper headlight repair can significantly improve vehicle safety and appearance. By following these detailed techniques, you can effectively restore headlights to their original clarity and functionality. Whether dealing with oxidation, scratches, cracks, or moisture, each step is crucial in ensuring a professional and long-lasting repair.

Features of Our Headlight Restoration Service for your city

Other Car Service we Provide in Lucknow

car-detailing-ceramic-coating-alwaysdrylucknow

Ceramic Coating Service

car-restoration-ceramic-coating-alwaysdrylucknow

Car Detailing Service

paint-correction

Paint Correction Service

PPF-Paint-Protecting-Films

Paint Protection Films Service

car-steam-wash-service-lucknow

Car Wash Service